Functie:
Reverse does not burn, the number does not shake
Digital tube: 36 x 14 x 13mm (L x W x H)
Board: 35 x 16mm
Power supply: 7-30V, high brightness LED digital tube
Color: red, blue, green, yellow (optional)
4 display modes: 1: Display time only 2: Display temperature only 3: Display voltage only 4: Tijd temperature voltage is alternately displayed.
Opmerking:
1. The difference between 33v and 200v is that the maximum measurement voltage is different. Car battery 12v can select 33v, and electric vehicle can select 200v.
2. Three-in-one table temperature sensor line defaults 1 meter, can not be extended, will affect the accuracy of time after extension, please think twice.
| Spanning | R ange: 0-33V, error +-0.02V R ange: 0-200V, error +-0.1V Power supply 7-30V. Two r anges are available. |
| Temperatuur | -50 ° C ~ 125 ° C, DS18B20 probe, extension line 1 m, waterproof. Accuracy 0.0625, no calibration required. |
| Tijd | 24-uursysteem, klokchipnauwkeurigheid van 15 ppm, met uitschakelgeheugenfunctie, nauwkeurige tijd. |
Key setting:
Button 1:
Short press to select the clock, second, voltage, temperature display mode;
Press and hold to display ALL, enter the time—voltage—temperature tracking mode, with an interval of 5 seconds. Press the button again to exit the mode.
Button 2:
Short press to adjust time, minute (flashing), and press one button to adjust. Press button 2 again to exit the adjustment mode.
Remarks: Adjust “minutes”, the clock will stop after exiting, and press the button to start walking.
Pakket bestaat uit:
1 x voltmeter
