Overzicht:
– De Raspberry Pi 3 Model B+ is de nieuwste product in het Raspberry Pi 3-bereik, met een 64-bits quad-core processor die draait op 1,4 GHz, dual-band 2,4 GHz en 5 GHz draadloos LAN, bluetooth 4.2 / BLE, snellere Ethernet- en PoE-mogelijkheden via een aparte PoE HAT.
– Het dual-band wireless LAN wordt geleverd met modulaire compliancecertificering, waardoor het board kan worden ontworpen voor eindproducten met aanzienlijk verminderde, draadloze LAN-compliancetests, waardoor zowel de kosten als de time-to-market verbeteren.
– Het model Raspberry Pi 3 B+ handhaaft dezelfde mechanische voetafdruk als zowel model Raspberry Pi 2 Model B als model B van type Raspberry Pi 3.
Specificaties:
– Processor: Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1,4 GHz
– Geheugen: 1GB LPDDR2 SDRAM
– Connectiviteit:
1. 2,4 GHz en 5 GHz IEEE 802.11.b / g / n / ac draadloos LAN, bluetooth 4.2, BLE
2. Gigabit Ethernet via USB 2.0 (maximale doorvoer 300 Mbps)
3. 4 USB 2.0-poorten
– Toegang: Uitgebreide 40-pins GPIO header
– Video geluid:
1. Full-size HDMI
2. CSI-camerapoort voor het aansluiten van een Raspberry Pi-camera
3. DSI-weergavepoort voor het aansluiten van een Raspberry Pi touchscreen-display
4. 4-polige stereo-uitgang en composiet videopoort
– Multimedia: H.264, MPEG-4-decodering (1080p30); H.264-codering (1080p30); OpenGL ES 1.1.2.0-afbeeldingen
– Ondersteuning voor SD-kaarten: Micro SD-poort voor het laden van uw besturingssysteem en het opslaan van gegevens
– Ingangsvermogen:
1. 5V / 2,5A gelijkstroominvoer
2. 5V DC via GPIO-kop
3. Power-over-Ethernet (PoE) -ondersteuning (vereist een afzonderlijke PoE-hoed)
– Milieu: Bedrijfstemperatuur, 0-50 ° C
Meer info., Kan verwijzen naar WIKI
Pakket inbegrepen:
1x Raspberry Pi 3 Model B+ bord
Mechanical:
Warnings:
– This product should only be connected to an external power supply rated at 5V/2.5 A DC. Any external power supply used with the Raspberry Pi 3 Model B+ shall comply with relevant regulations and standards applicable in the country of intended use.
– This product should be operated in a well-ventilated environment and, if used inside case, the case should not be covered.
– Whilst in use, this product should be placed on a stable, flat, non-conductive surface and should not be contacted by conductive items.
– The connection of incompatible devices to the GPIO connection may affect compliance, result in damage to the unit, and invalidate the warranty.
– All peripherals used with this product should comply with relevant standards for the country of use and be marked accordingly to ensure that safety and performance requirements are met. These articles include but are not limited to keyboards, monitors, and mice when used in conjunction with the Raspberry Pi.
– The cables and connectors of all peripherals used with this product must have adequate insulation so that relevant safety requirements are met.Safety instructions:
To avoid malfunction of or damage to this product, please observe the following:
– Do not expose to water or moisture, or place on a conductive surface whilst in operation.
– Do not expose to heat from any source; the Raspberry Pi 3 Model B+ is designed for reliable operation at normal ambient temperatures.
– Take care whilst handling to avoid mechanical or electrical damage to the printed circuit board and connectors.
– Whilst it is powered, avoid handling the printed circuit board, or only handle it by the edges to minimise the risk of electrostatic discharge damage.
– This product should only be connected to an external power supply rated at 5V/2.5 A DC. Any external power supply used with the Raspberry Pi 3 Model B+ shall comply with relevant regulations and standards applicable in the country of intended use.
– This product should be operated in a well-ventilated environment and, if used inside case, the case should not be covered.
– Whilst in use, this product should be placed on a stable, flat, non-conductive surface and should not be contacted by conductive items.
– The connection of incompatible devices to the GPIO connection may affect compliance, result in damage to the unit, and invalidate the warranty.
– All peripherals used with this product should comply with relevant standards for the country of use and be marked accordingly to ensure that safety and performance requirements are met. These articles include but are not limited to keyboards, monitors, and mice when used in conjunction with the Raspberry Pi.
– The cables and connectors of all peripherals used with this product must have adequate insulation so that relevant safety requirements are met.Safety instructions:
To avoid malfunction of or damage to this product, please observe the following:
– Do not expose to water or moisture, or place on a conductive surface whilst in operation.
– Do not expose to heat from any source; the Raspberry Pi 3 Model B+ is designed for reliable operation at normal ambient temperatures.
– Take care whilst handling to avoid mechanical or electrical damage to the printed circuit board and connectors.
– Whilst it is powered, avoid handling the printed circuit board, or only handle it by the edges to minimise the risk of electrostatic discharge damage.
